Actions may be added to Cues, Memories, or Scheduled Events. Action are grouped by type including Playlist, Memory, Cognito, and Timecode:
None: Event triggering is disabled. Default.
Playlist: Triggers cue playback action, according to these further choices.
Goto: Begins as a playlist at a specific cue, using the following:
Playlist: Selects a playlist, by name.
Cue: Selects a starting cue, by name.
Pause: Pauses the selected Playlist.
Go: Starts the selected Playlist from the current cue.
Release All: Releases all active Playlists and cues.
Release: Releases, or stops playback, of the selected Playlist.
Memory: Triggers memory playback action, according to these choices:
Bump Down: Activates a memory, according to the following:
Memory Page: Selects a memory page, by name.
Memory: Selects a specific Memory, by name.
Bump Up: Deactivates a memory, according to the following:
Memory Page: Selects a memory page, by name.
Memory: Selects a specific Memory, by name.
Cognito: Triggers a console-level event, according to the following:
Power Off: Turns off the console
Outputs: Enables or disables DMX and eDMX output
Send MIDI: Sends a MIDI string to the MIDI OUT port
MIDI Data: Touch the keypad to enter the required MIDI string
neato Lockout: Enables/disables wireless device control.
Release Locks: Releases any active Desk or Tech Locks of lights.
Release Lights: Releases any currently selected lights.
Memory Blackout: Blacks out all intensity channels currently controlled by a Memory.
DBO: Blacks out all intensity channels, excluding any Desk-locked intensities.
Stop All Effects: Terminates all effects currently running.
Timecode: Used to control the Internal Timecode clocks.
Reset
Timecode: Uses the Playlist's reset time as specified by
Pause Timecode: Stops an Internal Timecode clock.
Start Timecode: Starts an Internal Timecode clock.
Clock: Specified Internal 1, 2 or 3 for the three commands above.
Choreo NSB: Additional control for Choreo NSB stations.
Mute Station: Used to Mute and Unmute the buttons and sliders on the network.
Room: Defines which Room's stations need to be changed.
Mute: Can be either Mute or Unmute. These functions are available for user control from the touchscreen in SETUP | ROOMS by Shift Clicking on a Room or a Space or in Wall Statio Mode by clicking on a Room or a Space.