Memory Master and Memory Black Out Button

The Memory Master is located at the bottom right of the console.  The Memory Master controls the overall intensity of the lights recorded into Memories while those lights are active. The Memory Master’s level in percentage is show in the Status Bar in the top right hand corner of the touch screen. When the Memory Master is at less than 100%, the level is shown in red as a warning. Playlist cues and individual lights controlled by sliders (from SELECT mode) are not affected by the Memory Master.

Above the Memory Master is the Memory Black Out button.  Normally, the button is backlit blue.  If the Memory Master is not at its highest position, the Memory Black Out button will glow red. 

When pressed, the Memory Black Out button will flash red, and all lights being played back within Memories will go dark (output intensity goes to zero percent).  Press the button again to restore lights to their previous intensity.

If you set a Memory's Priority to 2, intensity levels from that recorded (and active) Memory will not be affected by the Memory Master.

Below the Memory Master is a Shift button .  The Shift button accesses short cuts and special features which are described in Other Features Shift Key Magic.